Every watt lost in conversion is a watt not available for compute.

A conventional DC/DC converter is tuned for one operating point. As AI workloads swing, its efficiency falls away and more power turns into heat.

Talk to our power engineers

Electrification and AI infrastructure are running into the same wall: there is not enough power where it is needed.1

Power, not chips

Access to power has become the main bottleneck in AI data centres. The grid connection you have is the grid connection you will have for years.2

Loads that never sit still

AI workloads fluctuate and EV charging is one of the most variable loads on the grid. Conventional converters are optimised for a narrow peak-efficiency point and lose ground everywhere else.2

Losses come back as heat

Every watt lost in conversion turns into heat that has to be cooled. Cutting the loss frees capacity twice: once at the rack, once at the chiller.2

  1. Vensum Power, vensum.com.
  2. Vensum Power, applications, vensum.com/product.

Efficiency held near its peak across the whole operating range.

Software-Defined Power Conversion (SDPC) combines soft switching with digital control of the conversion process. The converter adapts in real time to changing loads and input voltages.

Soft switching, everywhere in the range

Zero Voltage Switching and Zero Current Switching remove the moment where voltage and current overlap in the switch. That overlap is where conventional converters burn energy. Higher switching frequencies then make the converter smaller and more powerful.

Hard switchingZero voltage switching overlap = lossno overlap currentvoltage

Software in the control loop

Advanced modelling lets SDPC use the full potential of ZVS and ZCS at every operating point. Where a conventional converter drops off at partial load, SDPC stays close to its peak. Diagnostics and updates run remotely, without interrupting operations.

fast-changing load range loadefficiency conventionalSDPC illustrative curve

One platform, reconfigured

Every Vensum product is built from the same validated blocks of hardware, firmware and control software. They are reused and reconfigured for new voltages, power levels and applications, so a new converter is developed significantly faster than an application-specific design.

control softwarefirmwarehardware EV chargingenergy storagedata centre

Side by side

How SDPC differs from an application-specific converter, from Vensum's own technology description.

PropertyConventional converterVensum SDPC
EfficiencyPeaks at a narrow operating pointNear peak across very wide ranges
Fast load changesEfficiency falls awayAdapts in real time
SwitchingHard switching lossesZVS and ZCS soft switching
DesignBuilt from scratch per applicationReconfigured from validated blocks
ServiceOn-siteRemote diagnostics and updates

Where SDPC fits

Compatible with distributed and centralised power architectures, compact enough for new builds and retrofits.

AI data centres

More usable compute from the same connection

Near-lossless conversion holds efficiency at peak as AI workloads fluctuate, turning constrained power capacity into more usable compute and less heat to cool.

AI data centres in detail

EV charging

Smaller stations, lower operating cost

Compact converters fit new and existing infrastructure and reduce the footprint of charging stations. Higher efficiency means lower energy losses for owners and operators.

EV charging in detail

Energy storage and DC microgrids

More usable energy from every cycle

Energy is converted every time it is stored and released. Near-lossless conversion means more usable energy per cycle, faster charging and discharging, and intelligent control of DC energy flows.

Storage and microgrids in detail

Built in Finland since 2018, now heading for mass production

Born out of research in deep technology, with patented and patent-pending technologies. Series production starts in 2027.3

“The question in data centres is no longer only how powerful the chips are, but how efficiently the used electricity actually reaches them.”
Peter Nisula, CEO, Vensum Power3
  • Peter NisulaCEO
  • Tero LehtonenCOO, Commercial and Operations
  • Osku SahlstenResearch and Development
  • Aleksi UskiFinance
Series A, November 2026€9M raised, €15.2M in total
Co-leadLifeline Ventures
Co-leadLarsen & Toubro Group
Co-leadEviny Ventures

Send us your power problem

Tell us the application and the power level. Our power electronics team replies with how SDPC would fit.